TECHNO-GAZ ONE 2165S Manuel De L'utilisateur page 45

ENGLISH
STEP 4
Insert the tool to sterilize the envelope you just created.
Do not push the tool against the weld just made, but leave a little space as shown
in the figure below.
The above is necessary for proper enveloped not observing this process, it is
possible that at the time of the second welding, would be created tensions pose a
threat to good performance of welds.
STEP 5
Proceed now to the second sealing the envelope.
To facilitate the insertion operation, put the bag between the sealing jaws, slightly
angled position with respect to sealing, thus facilitating the operation input of one
of the corners of the section to be welded.
21