Key Dimensions And Specifications - LG DLEX3360 Série Mode D'emploi

Sécheuse
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STACkING kIT INSTALLATION
Place the dryer on top of the washer by
3
fitting the dryer feet into the side brackets as
illustrated. Avoid finger injuries; do not allow
fingers to be pinched between the washer
and dryer. Slowly slide the dryer toward the
back of the washer until the side bracket
stoppers catch the dryer feet.

kEY DIMENSIONS AND SPECIFICATIONS

The appearance and specifications listed in this guide may vary due to constant product improvements.
Steam Dryer™ Models
Description
Electrical Requirements*
Gas Requirements*
Dimensions
Net Weight
Drying Capacity
- Normal Cycle
- Steam Cycle
*Refer to the rating plate on your dryer.
46
(cont.)
Dryer
Washer
DLEX3360* DLGX3361*
Steam Dryer
Please refer to the rating label regarding detailed information.
Natural 6-8 inches
WC/LP: 10–13 inches WC (Gas Models only)
11
27" (W) X 30" (D) X 38
/
68.6 cm (W) X 76.1 cm (D) X 98.3 cm (H), 129.7 cm (D with door open)
136.6 lb (62 kg)
IEC 7.4 cu.ft. (22.5 lb/10.2 kg)
IEC 7.4 cu.ft. (8 lb/3.6 kg)
Insert the front rail between the bottom of
4
the dryer and the top of the washer. Push the
front rail toward the back of the washer until it
comes in contact with the side rail stoppers.
Install the two remaining screws to secure the
front rail to the side rails.
" (H), 51" (D with door open)
16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dlgx3361 série

Table des Matières