Set The Clock Manually - Oregon Scientific PROJI Mode D'emploi

NOTE
• It takes 2-10 minutes to receive the clock signal. If the signal is weak, it could take up to 24 hours
to receive a valid signal.
• Not applicable to Asia and non-designated areas.

SET THE CLOCK MANUALLY

1. Press and hold . The screen displays ZONE and the number flashes.
2. Press once or press and hold +/- to adjust the setting.
• For EU/UK, the time-zone offset sets the clock up to +/- 23 hours from the received clock
signal time.
• For US, the time-zone setting is Atlantic (A); Mountain (M); Pacific (P); Central (C); Eastern
(E); Newfoundland (N).
3. Press to confirm.
4. Press once or press and hold +/- to adjust the setting for 12/24h hour format, hour, minute,
year, calendar format (month-day/day-month), month, date, temperature unit (°C/°F) , language
and daylight saving time (DST) (ON/OFF) for US.
5. Press to confirm each setting.
NOTE
• The language options are English (ENG), Spanish (SPA), Italian (ITA), French (FRE) and
German (GER).
• The signal reception is on after each reset or battery replacement.
- 7 -
•
•
A
S
1.
2.
3.
4.
T
P
A
O
W
•
•