Operating Elements And Connections; Safety Notes - Monacor IMG STAGELINE PARL-14DMX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
All operating elements and connections de -
GB
scribed can be found on page 2.
1 Operating Elements
and Connections
1 Mounting brackets
2 Control SENSITIVITY for the sensitivity of
response in case of music control via the micro-
phone (3)
3 Microphone for music control
4 Mains jack for connection to a socket (230 V~/
50 Hz) via the supplied mains cable or for con-
nection to the jack POWER LINK OUTPUT (10)
of another PARL-14DMX
5 Display
6 Operational buttons
Button FUNC (= function) to activate the adjust-
ing mode
Buttons UP and DOWN for selection of a control
programme or a colour and for adjusting the
DMX start address
Button ENT (= Enter) to confirm a selection and
to memorize an adjustment
7 Locking screws for the mounting brackets (1)
8 Support for the mains fuse
Only replace a blown fuse by one of the same
type
9 Lug for fixing a safety rope
10 Connection POWER LINK OUTPUT for power
supply of another unit
11 Connection jack (not used)
12 DMX signal input (3-pole XLR) for connection of
a light controller;
pin 1 = ground, 2 = DMX-, 3 = DMX+
13 DMX signal output (3-pole XLR) for connection
to the DMX input of another DMX light effect
unit;
pin 1 = ground, 2 = DMX-, 3 = DMX+

2 Safety Notes

This unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The spotlight uses hazardous mains
voltage. Leave servicing to skilled
personnel only and do not insert any-
thing into the air vents; inexpert han-
dling may result in electric shock.
Please observe the following items in any case:
8
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range 0 – 40 °C).
G
Do not place any vessel filled with liquid on the
unit, e. g. a drinking glass.
G
Do not set the spotlight into operation or immedi-
ately disconnect the mains plug from the mains
socket
1. if the unit or the mains cable is visibly dam-
aged,
2. if a defect might have occurred after the unit
was dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the unit must be repaired by skilled
personnel.
G
Never pull the mains cable for disconnecting the
mains plug from the mains socket, always seize
the plug.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
safely mounted or not correctly connected or
operated, or if it is not repaired in an expert way.
G
Important for U. K. Customers!
The wires in this mains lead are coloured in
accordance with the following code:
green/yellow = earth
blue = neutral
brown = live
As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green and yellow
must be connected to the terminal in the plug
which is marked with the letter E or by the earth
symbol , or coloured green or green and yel-
low.
2. The wire which is coloured blue must be con-
nected to the terminal which is marked with the
letter N or coloured black.
3. The wire which is coloured brown must be con-
nected to the terminal which is marked with the
.
letter L or coloured red.
Warning – This appliance must be earthed.
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which will not be harmful to
the environment.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

38.6000

Table des Matières