Controls And Connections - MTX Audio iP1s Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
US
Thank You !
Thank you for purchasing an MTX Audio High-End portable speaker. Proper tracks quality
UK
matched with MTX portable speaker provide superior sound and performance for end-
less hours of waking the neighbors, slammin' your friends or flat out stomping wanna-be
players. Congrats and enjoy the ultimate audio experience with MTX !
What's in the box ?
1. The MTX iP1s portable speaker
2. The carrying case
Specifications :
• Wireless portable speaker
• Power : 15W Peak - 5W RMS
• Speakers : 50mm wide range
• Inputs :
- Bluetooth
- AUX (3,5mm Jack)
- microSD (mp3, Flac)

Controls and connections :

3. The USB cable
4. This owner's manual
• Recharge : USB 5V 2A
• Aluminum body
• Dimensions : 80x80x33mm
• Weight : 240g
Top controls
Connectors
1. Power : Click once to turn
5. Volume Down : Click once
on the unit. Click again to turn
to decrease the volume one
off the unit
step. Click and hold for quick
volume Down.
2. Source selection : Bluetooth.
Click once to switch on the
6. Play/Pause (BT & SD) :
Bluetooth input. If the unit
Click once to Play or Pause,
doesn't find any available
double click for Next Track, triple
device already paired, it goes
click for Previous Track.
to paring mode automatically.
Click and hold 2 seconds to force
7. Volume UP : Click to increase
BT pairing.
the volume one step. Click and
hold for quick volume UP.
3. Source selection : AUX. Click
8. Blue Power LED : Will
once to switch on the AUX input
(3,5mm Jack at the back - #12).
flash quickly when battery
charge is low, will flash slowly
4. Source selection : microSD
when charging, and will stay
solid blue when charging is
card. Click once to switch on the
SD input (microSD at the back
complete.
- #13). A microSD card must be
inserted with proper tracks to
9. Bluetooth LED : Blue when
work fine.
BT is on.
About the microSD card
The microSD card is designed
2. On Mac or on PC, the iP1s will
to store a large quantity of your
show up like a USB key.
3. Drag and drop your favorite
favorite tracks. You don't need
any Bluetooth connexion to
records and tracks in mp3 or Flac
play the tracks located on the
format on the iP1s SD card.
microSD card.
4. Eject/Remove it.
5. Push Power on the iP1s, push
1. Turn off the iP1s, introduce the
SD, and enjoy your favorite
microSD card and connect it with
tracks.
the USB cable on a computer.
10. AUX LED : Blue when
AUX is on.
11. SD LED : Blue when SD is on.
12. AUX Input : connect your
analogical device here and click
#3 to listen to it.
13. microSD card slot : Insert
your microSD card in the right
direction (see drawing) and
click #4 to listen to it.
14. USB connector : Use this
port to recharge the iP1s. The
USB cable is included.
Important :
The microSD card format can be
FAT32 or exFAT.
The tracks format can be mp3 or
FLAC (up to 16 bits 44KHz)

Publicité

Table des Matières
loading

Table des Matières