Sleep Button; Light Button - Tekno Point WN-09 Manuel D'utilisation

ENGLISH
Releasing the button at the end of the setting, the display of the indoor unit will show the set temperature.
(The temperature cannot be adjusted in AUTO mode)
When setting the timers (TIMER ON, TIMER OFF or CLOCK) press the (+) or (-) keys to adjust the time (see
the CLOCK, TIMER ON, TIMER OFF keys for more details).
HEALTH button
Pressing this button activates the air purification function. The corresponding icon will be shown on the
remote control display.
This function is not available for all indoor unit models.

SLEEP button

Pressing the SLEEP button activates the night function. The corresponding icon will be shown on the
remote control display.
The function can be activated in the COOL, HEAT and DRY operating modes.
The function will be automatically deactivated when the unit is turned off.
Function not available in DRY and AUTO mode.
I FEEL button
Press the I FEEL button to activate or deactivate the function. The corresponding icon will be shown on the
remote control display.
By activating this function, the detection of room temperature will be carried on the remote control and no
longer on the indoor unit.
Make sure that the remote control is protected from heat or cold sources and that it is able to
communicate through infrared with the indoor unit for correct use.

LIGHT button

Pressing the "LIGHT" button activates and deactivates the display of the indoor unit. The remote control
icon will turn on or off accordingly.
HUMIDITY button
Press the key to activate / deactivate the Humidity function
T / H button
When the Humidity function is activated, press the T / H button to choose the setting between
Temperature and Humidity.
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
COMMERCIALE@TEKNOPOINT.COM – WWW.TEKNOPOINT.COM
MUI_WINE_Ita_Eng_Fra_Deu_TP/Rev.00/Data 28.09.2020
50