Technical Specifications - VONROC TT501XX Traduction De La Notice Originale

TECHNICAL SPECIFICATIONS

Model No.
Max load capacity
Stap length
Dimensions (folded)
Dimensions (unfolded)
Product weight
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-3.
1. Handle
2. Frame
3. Handle knob
4. Load plate
5. Wheel
3. OPERATION
Unfolding for usage (Fig. A, B1, B2)
1. Pull the handle (1) upwards until the handle
knob (3) is locked automatically.
2. Push down the load plate (4), the wheels (5)
will automatically fold out with the load plate
(4).
Folding for storage (Fig. A, C1, C2)
1. Pull the handle knob (3) backwards and slide
the handle (1) down.
2. Pull the load plate (4) towards the frame (2).
Be careful the wheels (5) will automatically folds
up towards the back of the frame (2).
Loading the load plate
• Check if the hand truck is properly unfolded.
• Lean the hand truck slightly forward. So the load
plate can be pushes directly under the load.
• Tilt the load and push the hand truck under the
load as far as possible.
• Tilt the hand truck into the transport position.
To unload the load from the hand truck, proceed in
reverse order.
WWW.VONROC.COM
TT501XX
80 kg
1.5 m
380x50x700mm
380x374x960mm
2.8 kg
4. MAINTENANCE
Risk of damage! Improper handlining of the
hand truck can lead to damages. Always
check product for damage before first use.
Check regularly that the hand truck is in perfect
condition, re-tighten the screws if necessary and
make sure the frame engages correctly.
Clean the product
• Never use mineral spirits, solvents or aggres-
sive cleaning agents for cleaning.
• Clean the product with a damp cloth and , if
necessary, with a mild detergent.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or improp-
erly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by
company either expressed or implied. There are
no other warranties expressed or implied which
extend beyond the face hereof, herein, including the
implied warranties of merchantability and fitness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
EN
5