Before Use - Intenso Video Jumper Notice D'utilisation

5.

Before use

Connect with the PC
With the operating systems Windows 98/SE please install a driver before you connect the
player with the PC. (The download is available on the following website: www.intenso.de).
For the operating systems WIN 2000/XP/ME/Vista/Windows 7 the installation of the driver
is not needed.
Please go ahead as follows:
(1) Connect the player with the USB connection of the PC.
(2) The window "Intenso" will open. Now you can save the data from your hard disk on
the removable medium.
Safe removal from the PC
For Windows 2000/XP/ME/Vista/Windows 7:
Click with the right mouse button down right in the task bar on the symbol "Remove
hardware securely". In the displayed context menu please select the point "Remove USB
mass storage device driver" with the left mouse button. Please make sure that the data
transmission has been completed.
Now you can remove the device.
For Windows 98/SE:
Select the device in the „device manager" with the left mouse button. Now click on the
menu point "Remove". Make sure also here that the data transmission has been
completed.
Now the device can by disconnected from the computer.
Battery charge:
The device is equipped with an integrated li-polymer battery. The battery is charged by the
USB connection with your PC.
At the first use of the device please pay attention that the battery is completely charged, in
general this process takes 4 hours.
To charge the battery please connect the device with the PC by the USB cable. The
charging process starts automatically.
If you would like to know the actual status of the charging process, please disconnect the
device from the PC. On the display top right you can see a battery symbol. If the symbol
flashes green, the battery is completely charged.
Instruction: To achieve an optimal performance the li-polymer battery must be regularly
used. If this is not the case, charge the battery completely at least once per month.
Page 3 of 13 GB