Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
Weight: 1.07 Kg (2.35 lbs)
Dimensions: 258 x 173 x 97 mm
Working pressure: 7.8 Bar (113.7 psi)
Noise level: 64.3 dB
Vibration level: 0.876 m/s2
Note
•
Vibration Emission Test refers to ISO EN ISO 20643:2008/A1:2012 Hand-held portable power
tools - Test methods for evaluation of vibration emission
•
Noise Test refers to BS EN ISO 15744:2008 Hand-held non-electric power tools - Noise
measurement code - Engineering method (grade 2) (ISO 15744:2002)
INSTRUCTIONS
1.
Choose a proper sized and pinned adapter (Fig. 1).
2.
Connect the adapter to the magnetic pins on the pneumatic tool tip.
3.
Connect the pneumatic tool to shop air line.
4.
Press pressure release button and turn the rotating lever to adjust the length.
5.
Mount the pneumatic tool to the brake caliper.
6.
Press power button to fix the tool on the brake caliper (Fig. 2).
7.
Make sure the tool is securely installed on the brake caliper.
8.
Press power button continually and turn the rotating lever to wind back the brake piston.
9.
After the piston is winded back to the proper position, press pressure release button to remove
the pneumatic tool from the brake caliper (Fig. 3)
Fig.1
APPLICATIONS
The vehicle list on last sides is for reference only. More vehicle applications are possible. Some car
models may have multiple suitable adapters due to variations in body style, engine type and engine
numbers.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Pneumatic tool
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
No.: 0, 2, 3, 4, 5, 6, 7, 8, 9, A, B1, B2,
B3, B4, B5, E, F, K, K1, M, N, W
Material: S45C
Surface finish: Phosphate
Fig.2
Adapters
Fig.3
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
Table des Matières
