Troubleshooting; Disposal - Imetec P5002 Mode D'emploi

WARNING! Make sure all cleaned parts
are completely dry before reusing the
EN
appliance.
BLADE HEAD
• Switch the appliance off and disconnect the adapter plug (11).
• Remove the adjustable comb (5 or 6) by pressing the comb release
buttons (7) and removing it from the appliance.
• Press the centre of the blade head (4) with your thumb until it opens
[Fig. B1], and then remove it from the appliance.
• Do not drop the blade head (4).
• Clean the blade head (4) and the interior of the appliance with the
brush provided [Fig. B2, B3].
Insert the lock tab of the blade head in the slot and push the head until
it clicks into place [Fig. B4].
Problem
The blades
do not move
Blades
become hot
The product is packaged in recyclable materials. Dispose of it
in accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE), the crossed bin symbol on the
appliance or its packaging indicates that the appliance must be
disposed of separately from other waste at the end of its useful
life.

TROUBLESHOOTING

Cause
Blades not
lubricated correctly
Blades not
lubricated correctly

DISPOSAL

20
Solution
Clean with the brush and
lubricate with the oil provided
Clean with the brush and
lubricate with the oil provided