Use - Imetec P5002 Mode D'emploi

WARNING! DO NOT use this appliance if
there are visible signs of damage.
WARNING! DO NOT use the appliance if
the blades are damaged or do not work
properly.
Make sure that your hair is dry and clean, with no residue of hairspray,
mousse, gel or other hair products, and then brush in the direction of
growth, untangling any knots.
WARNING! Switch the appliance off
before changing any accessories.
USING THE ADJUSTABLE COMB (5 OR 6)
Fit the adjustable comb required (5 or 6) as follows:
• Slide the adjustable comb (5 or 6) onto the locking grooves on the
appliance and push until it clicks into place.
• Make sure that the comb (5 or 6) is fastened securely in the locking
grooves on both sides.
• When fitted with the adjustable comb (5 or 6), the appliance has 14
different hair length settings:
ADJUSTABLE COMB (5): 3, 4.5, 6, 7.5, 9, 10.5, 12 mm
ADJUSTABLE COMB (6): 14, 15.5, 17, 18.5, 20, 21.5, 23 mm
• To set the comb (5 or 6) to the required cutting length, push the
adjustment button (8) and slide the comb into the required position.
• Turn on the appliance by moving the ON/OFF/TURBO button (3) to
position 1. Always switch the appliance off when not in use.

USE

17
EN