Troubleshooting - Pattfield Ergo Tools PE-DFS 10 Traduction De La Notice Originale

10. Troubleshooting

Fault
Pump does
not cut in
Pump cuts
out and in
constantly
Pump does
not cut out
Anl_ED_Schalter_PE_SPK7.indb 115 Anl_ED_Schalter_PE_SPK7.indb 115
Possible cause
- Power failure
- Pump not switched on
- No transport fl uid is
being discharged, the
output line is adequate-
ly pressurized
- Output side leaking
- Output side leaking
- Consumer open
- 115 -
Remedy
- Check the cable and
fuse
- Switch on pump
- Open consumer
- Check consumers and
output line for leaks
- Check consumers and
output line for leaks
- Close consumer
GB
27.10.15 13:11 27.10.15 13:11