Fein MULTIMASTER FMM 250 Mode D'emploi page 11

M M FMM 250 / M
ULTI ASTER
Assembly instructions.
Mounting the suction device (Figure 2).
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
➤
Mount the suction device step by step as shown in the figures.
➤
For connection with a FEIN Dustex or a vacuum cleaner, various hose adapters are
available as an accessory.
➤
To remove the suction device again, push the clamp at the mark to the rear (
➊
➍
➐
M FMM 250 Q
ULTI ASTER
➋
➎
➌
Suction device
➏
➑
EN
➑
).
Fig. 2
11