Maintenance And Cleaning; Environment Protection - Jata electro EV1026 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

7.Vacuum packing has finished. Press the side buttons simultaneously to open the cover and remove

the bag. - Fig 4

NOTE

• For an improved sealing effect, leave the machine to cool for a minute before using it again.

Eliminate any remaining liquid or food from the vacuum chamber before further packing.

• Do not carry out the sealing function continuously to avoid overheating the heating element. The

machine will reject the function if the "sealing" button is activated 15 seconds from the last time.

• The machine is designed to be used with suitable bags. Do not use another type of bag that is

not suitable for vacuum packing.

Cut the bag with scissors to open the sealing area

III. Vacuuming the bowl

1. Clean the cover, the base of the bowl and ensure that it is clean and dry.

2. Place the foods in the bowl and leave at least 2 centimetres between the food and the edge of

the cover.

3.Open the cover of the appliance and insert the end of the tube in the air inlet

for the bowl (14) and the other end in the centre of the hole of the bowl cover.

4. Press the bowl switch (5) to begin vacuuming. To assure that no air escapes between the cover

and bowl, press down with your hand at the beginning of vacuuming. The machine will stop

automatically when it has obtained sufficient vacuuming pressure with the red button remaining

slighted inserted.

5. In order to use the wine stopper, follow the same steps as indicated for the bowl. To remove it

just pull it.

Opening the bowl after vacuuming

To open the bowl, the air needs to be released pushing the blue button.

IV. Marinating meat with the bowl.

1. Remove the tube accessory from inside the cover

and insert it into the bowl inlet and the hole on

the side of the housings (14). Fig 1

2. Use the "Suction" button to confirm the desired

vacuuming pressure

(Normal/Gentle) depending on the food to be

marinated.

Normal is the default option.

Presses "MARINATE" button to begin working. Fig 2.

The luminous indicator blinks while the process is in operation.

Marinating takes 3 cycles in operation. The vacuuming time is 1 minute and rest time is 3, so that

once the machine stops after emptying, a break of 3 minutes will take place, and it will then return

later to vacuuming and continuing the process.

Marinating will take a total time of about10 minutes.

3. When the pilot light goes out, the marinating process has finalized. Remove the pipe from the

bowl and the apparatus.

NOTE

• When starting to vacuum in a bowl, slightly press the cover and the adapter of the pipe to avoid

air leaks between the cover and the edge of the bowl.

• In order to verify vacuuming, simply pull on the cover, it should not move.

• Do not press any button during the operation that could affect the marinating process.