Adjustment Of Interpupillary Distance; Dioptric Compensation - Kite Optics COMPACT 8X23 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.
Adjusting the eyecups for use with and without spectacles (1)
Fold down the rubber eyecups for viewing while wearing spectacles. If not wearing specatcles, leave the
eyeups in the upright position.
3.

Adjustment of interpupillary distance

To see a single round image, turn the two halves of the binoculars until no irritating shadows can be seen.
4.
Adjustment of focusing (4)
By turning the focusing wheel you can focus any object from closeby to infinity.
5.

Dioptric compensation (2)

To achieve optimal image quality, the possibly varying visual acuity between the left and right eye
must be corrected.
Use without eyeglasses and equal acuity of both eyes, or with eyeglasses.
Place the diopter adjustment wheel (= right eyecup) in the middle-indicatior position.
Use without eyeglasses and varying acuity.
1. Look through the left ocular with your left eye and turn the focusing wheel to focus sharply
on a selected object.
2. Now look at the same object through the right ocular with your right eye and again create a sharp image
of this object, by turning the diopter adjustment wheel. which in this case is the right eyecup.
Now the dioptric correction wheel has been set for your particular visual acuity.
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fitis 10x40

Table des Matières