Overriding Schedules-Home - Honeywell Home 9000 Guide De L'utilisateur

Adjusting program schedules
If you selected I'll do it myself
Create/Edit Schedule screen (page 7),
follow these steps:
1 Select the days to schedule, touch Next.
2 Touch Wake to set your Wake time for
selected days.
3 Touch p or q
temperatures for the Wake period, then
touch Done.
4 Touch other time periods (Leave, Return,
Sleep) to set time and temperatures for
each.
Done
5 Touch to save and exit.
Note: Touch Delete Period
unwanted time period.
Note: Touch Fan Settings
settings for any time period.
Overriding schedules: home use
1 Touch or
p q
temperature (right side of screen)
and the Hold Until time (left side).
The schedule will resume when the
Hold Until time expires.
Switch to Permanent Hold
2 Touch
the same temperature until you
change it or resume the program
schedule.
3 Touch Cancel Hold
resume the program schedule.
69-2814EFS—07
on the
to set Heat and Cool
to eliminate any
to customize fan
to adjust the
to keep
at any time to
Heat: 70°
Cool: 78°
Fan: Auto
6:00 am
WAKE
8
Next
Done
Switch To
Permanent Hold