Philips SW9700 Mode D'emploi page 240

240
Português do Brasil
2
1
1
5 Place the new shaving heads in the shaving
head holder.
Nota: Certifique-se de que os entalhes em
ambos os lados da cabeça de corte se
encaixem nas saliências no suporte das
cabeças de corte.
6 Place the retaining ring on the shaving head
and turn it clockwise to reattach the retaining
ring. Repeat this process for the other retaining
rings
- Each retaining ring has two recesses that fit
exactly around the projections of the shaving
head holder. Turn the ring clockwise until you
hear a click to indicate that the ring is fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.
7 Encaixe o suporte da cabeça de corte na parte
inferior da unidade de corte (até ouvir um
"clique").