Fitting Attachments - Remington AIR3D Mode D'emploi

Masquer les pouces Voir aussi pour AIR3D:

Manuel d'utilisation (6 pages)

Mode d'emploi (80 pages)

Table Des Matières

Table des Matières

Les langues disponibles

•

Do not leave the appliance unattended while plugged in.

•

Do not place the appliance on any soft furnishings.

•

Do not use attachments other than those we supply.

•

Do not set the appliance down while still on.

•

Do not twist or kink the cable, or wrap it round the appliance.

•

Do not use the appliance if it is damaged or malfunctions.

•

Check the cord regularly for any sign damage.

•

This appliance is not intended for commercial or salon use.

PARTS

1. Heat setting switch (N)

2. Speed setting switch (0, E)

3. Cool shot button

4. Ceramic back-lit grille

5. Inlet grille

INSTRUCTIONS FOR USE

•

Wash and condition your hair as normal.

•

Squeeze out excess moisture with a towel and comb through.

•

Hairsprays contain flammable material – do not use while using this product.

1. Plug your hairdryer into the mains power supply.

2. Switch your hairdryer on and select the desired speed setting (low 1 or high 2) using the

speed selector switch (0, E). The number below the switch will light up to show you

which setting you have selected. The back-lit grille will light up white when you switch

the haidryer on.

3. Select the desired heat setting (low 1, medium 2 or high 3) using the heat selector

switch (N). The number above the switch will light up to show you which setting you

have selected.

4. Press and hold the cool shot button to direct cool air onto your hair to help set your

style. The back-lit grille will illuminate blue when you use the cool shot feature.

5. Between uses, place your hairdryer down onto the supplied mat.

6. After use, turn your hairdryer off and unplug it.

7. Let your hairdryer cool down before cleaning or storing away.