Daitsu Inverter DS-9KIDB Mode D'emploi page 29

Installation of indoor unit
Step nine: hang the indoor unit
1. Put the bound pipes in the wall pipe and then make them pass through the wall
hole.
2. Hang the indoor unit on the wall-mounting frame.
3. Stuff the gap between pipes and wall hole with sealing gum.
4. Fix the wall pipe.
5. Check if the indoor unit is installed firmly and closed to the wall.
indoor
wall pipe
Note:
● Do not bend the drain hose too excessively in order to prevent blocking.
outdoor
sealing gum
lower hook of
wall-mounting frame
26
upper hook