Extension Cords; Technical Specifications - STERWINS EGT2-28.3 Mentions Légales & Consignes De Sécurité

Model
Rated voltage
Rated input power
Rated no-load speed
Cutting width
Line size
Sound pressure level LpA
Sound power level LwA
Uncertainty K
Guaranteed sound power level
Vibration level
Uncertainty K
Cutting system
Machine weight
The declared vibration value has been measured in accordance with a standard test method
and may be used for comparing one tool with another. The declared vibration value may also
be used in a preliminary assessment of exposure.
The vibration emission value during actual use of the tool can differ
WARNING!
from the declared value depending on the ways in which the tool is used. Identify
safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle
such as the times when the tool is switched off and when it is running idle in addition to the
trigger time).
Depending on the actual use of the product the vibration values can differ from the declared
total! Adopt proper measures to protect yourself against vibration exposures! Take the whole
work process including times the product is running under no load or switched off into
consideration! Proper measures include among others regular maintenance and care of the
product and application tools, keeping hands warm, periodical breaks and proper planning
of work processes!
The sound intensity level for the operator may exceed 85dB(A) and ear protection measures
are necessary.

EXTENSION CORDS

You should only use extension cords for outdoor use, PVC ordinary duty with a cross sectional
area not less than 1.0mm
over 15 meters but less than 40 meters.

4.TECHNICAL SPECIFICATIONS

2
for extension cord up to 15 meters and 2.5 mm
251
EGT2-28.3
220-240V~50Hz
550W
7200/min
280mm
Φ1.6mm
82.9 dB(A)
94.3 dB(A)
KpA: 3 dB(A)
96 dB(A)
4.8 m/s
2
1.5 m/s
2
2 lines/ automatic
2.6 kg
2
for extension
EN