Operation Instruction; Applications - GreenWorks Commercial GHX200 Guide D'utilisation

OPERATION INSTRUCTION

W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
W A R N I N G
Always wear safety goggles or safety glasses with side shields when operating power tools.
Failure to do so could result in objects being thrown into your eyes, resulting in possible serious
injury.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this product for the purpose listed below:
• Trimming and shaping hedges and shrubbery.
INSERTING AND REMOVING THE BATTERY (See Figure 3.)
1. To insert the battery (1), line it up with the battery compartment (2) on the tool. Slide the
battery into the battery compartment and push until the battery snaps into place.
2. To remove the battery, push the release button (3). This will cause the battery to raise out of
the tool. Pull the battery out of the battery compartment.
1
13
3
2
FIG.3