Technical Information; Installation Considerations - Hansgrohe Metris S 31161 1 Série Instructions De Montage / Mode D'emploi / Garantie

1¾"
2"

3⅛"
1¾"
1⅝"
2"
1¼"
5¾"
1⅛"
4"
2⅞"
English

Technical Information

1⅛"
Recommended water pressure
Max. water pressure
4"
Recommended hot water temp.
2⅞"
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
1.5 GPM
1⅜"
1⅝"