4.8 Installation and dismantling of the sunshade
Sunshade jack
1
pic. A
Installation:
1. Assemble the sunshade and set up the cover of sunshade. (Important: the
perforation mode of the sunshade cover and sunshade holder is shown in
picture 1.)
2. Insert the sunshade holder into the sunshade jack on both sides of the body. It
is installed in place when you hear a "click". Picture A: Place the sunshade to the
top position. Picture B: Place the sunshade to the bottom position.
Dismantling:
1. Pull the sunshade holder out of the sunshade jack.
2. Pull the connecting rod out of the sunshade holder. Then you can remove the
sunshade cover.
Sunshade
holder
pic.B
Car Seat + Isofix
2
3
21