BabyGo Car Seat + Isofix Instructions De Montage page 17

• The rigid items and plastic parts of a child restraint must be so located and instal-
led that they are not liable, during everyday use of the vehicle to become trapped
by a moveable seat or in a door of the vehicle.
• It is dangerous to make any alteration or additions to the device without the
approval of the competent authority, and a danger of not following closely the
installation instructions provided by the child restraint manufacturer.
• The child restraint must not be used without the cover.
• The seat cover should not be replaced with any other than the one recommen-
ded by the manufacturer, because the cover constitutes an integral part of the
restraint performance.
• The child seat should be kept away from sunlight if the seat is not provided with
a textile, otherwise it may be too hot for the child's skin.
• Never use a second-hand product , as you can never be certain what was hap-
pened to it.
4 USAGE
4.1 Installing position of the child seat in vehicle
When installed with ISOFIX anchorages and support
leg,this type of child safety seat is suitable for fixing into
the seat positions of the cars equipped with ISOFIX
system that are fitted in accordance with ECE R14.
ISOFIX-anchorages
Not to use rearward-facing in seating positions where an active frontal airbag
is installed.
Only use on this seat if ISOFIX anchorages are fitted.
Car Seat + Isofix
17