Operation Function - TECHCON SYSTEMS TS6500CIM Manuel D'utilisation

7.2 Operation Function

DESCRIPTION
1 Plunger Bracket
2 Cartridge Holder
3 Guide Block
4 Air Plunger Inlet
5 Pressure Relief valve
Drive Spindle with
6
Injection Rod
7 Start Buttons (Green)
8 Control Buttons
9 Air Regulator
Emergency Stop
10
button (Red)
11 LCD Display
Protective (Safety)
12
Cover
13 Plunger Disk
14 Fluid Level Sensor
 Holds plunger assembly when not in use
 Holds cartridge kit
 Operates with the plunger assembly and guide block
to drive the cartridge up and down for mixing
 Operates with the plunger assembly and cartridge
holder to drive the cartridge up and down for mixing
 Provides air to plunger
 Relief plunger pressure when door is opened
 Rotates mix rods during mix cycle
 Injects the hardener into the resin
 Starts the unit
 Press green buttons simultaneously to start
 Input buttons (see Fig. 4.0 and Fig. 5.0)
 Regulates the air pressure to the unit
 Stops the Unit in an Emergency
 Press to Engage
 "E-Stop!'' will be displayed,
 To reset, rotate the E-Stop knob a quarter turn
clockwise
 Displays unit status, operation and error messages.
 Protects operators when machine is in use
 Part of Plunger Assembly
 Senses the fluid level at the top of the cartridge
9
FUNCTION