Battery Selection - Scubapro Nova 850 WIDE Mode D'emploi

INSTRUCTIONS
Make sure to not over tighten the casing as this
could result in premature wear and/or damage
to the O-rings.
*NEVER USE A TOOL OF ANY KIND TO
TIGHTEN THE CASE*
To turn ON the SCUBAPRO Nova 850 WIDE
un-lock the light first by quickly pressing the
button 5 times within 3 seconds until the blue
standby-indicator light is turned on. Then press
the button for half second and the light turns
on. To switch from 100% to 50% mode press
the button once. Pressing the button again will
turn off the light and the blue standby- indicator
lights is turned on again. To lock the Nova 850
WIDE for storage or travel quickly press the
button 5 times or more within 3 seconds during
standby.

Battery selection

We recommend using only high quality batteries.
Low quality batteries can cause off-gassing and
damage to the internal electronics. The light is
fitted with an overpressure valve for your safety.
In case the battery produces gas leading to a
high internal pressure of the light, the valve will
open. This may cause water to enter the light.
! WARNING
Do not look directly into the light, or direct
the light into the eyes of others. Do not
alter or modify the dive light. If modification
causes water entry or other malfunctions,
the warranty will be void.
4