Protecting The Environment - Stanley FATMAX KFFMEW200 Mode D'emploi

Switch on the tool while holding it upside down.
u
Turn the centring knob (6) as required until the tracking of
u
the belt is centred over the rollers.
Fitting and removing the dust bag (fig. C)
Slide the dust bag (8) over the dust extraction outlet (7).
u
To remove the dust bag, slide it off the outlet.
u
Connecting a vacuum cleaner
Connect the hose of the vacuum cleaner to the dust
u
extraction outlet (7).
Use
Warning! Let the tool work at its own pace. Do not overload.
Variable speed control
The variable speed control allows you to adapt the speed of
the tool to the workpiece material.
Set the variable speed dial (3) to the desired setting. Use
u
a high speed for wood, medium speed for veneer and
synthetics and low speed for acrylic glass, and for remov-
ing paints.
Switching on and off
To switch the tool on, press the on/off switch (1).
u
For continuous operation, press the lock-on button (2) and
u
release the on/off switch.
To switch the tool off, release the on/off switch. To switch
u
the tool off when in continuous operation, press the on/off
switch once more and release it.
Hints for optimum use
Always hold the tool with both hands.
u
Do not exert too much pressure on the tool.
u
Regularly check the condition of the sanding belt.
u
Replace when necessary.
Always sand with the grain of the wood.
u
When sanding new layers of paint before applying another
u
layer, use extra fine grit.
On very uneven surfaces, or when removing layers of
u
paint, start with a coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually change to a fine
grit for a smooth finish.
Consult your retailer for more information on available
u
accessories.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
(Original instructions)
Regularly clean the ventilation slots in your tool using
u
a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
KFFMEW200 (Type 1)
Input voltage V
ac
Power input
W
m/min
Belt speed
Sanding
mm
base
Weight kg
Level of sound pressure according to EN 62841:
Sound pressure (L ) 88 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 99 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to
EN62841:
Vibration emission value while surface sanding (a
uncertainty (K) 1.5 m/s^
EC declaration of conformity
MACHINERY DIRECTIVE
%
ENGLISH
FMEW204 (Type 1)
230
1010
190 - 380
75 x 533
3.4
) 3.3 m/s^
h
2
.
230
1010
190 - 380
75 x 533
3.4
2 ,
5