Cleaning The Pre-Filter - Winix HR1000 Manuel D'utilisation

Care and Maintenance
FILTER CARE

2. Cleaning the Pre-filter

Intervals between filter cleanings may vary depending on the air quality.
Use a vacuum cleaner or soft brush to clean the Pre-filter. If it is
excessively dirty, wash with room temperature water.
x Use only water, do not use volatile substances such as alcohol or acetone.
 If the pre-filter becomes damaged or in any way needs replacement:
Please contact Winix
(877)-699-4649
www.winixamerica.com
 Do not use benzene, alcohol, or other volatile fluids, which may
 The Pre-filter is reusable after cleaning.
 Do not use hot water over 104°F or volatile fluids such as paint
 After washing the pre-filter, allow it to dry completely in a well-
English
cause damage or discoloration.
thinner.
ventilated area. Otherwise, it may develop a bad odor.
16
HR 1000