Buffalo PRO L496 Mode D'emploi page 4

Function
The "Hot Tray Populair" is ideally suited for keeping food at the right temperature.
Note: the hot tray is not suitable for hot pans moved directly from a stove. The hot tray
would overheat and switch off or might even be damaged beyond repair. If the hot tray
overheats, reset it by removing the plug from the socket and letting the appliance cool
down. After cooling down it can be used normally again.
Safety instructions:
 Only connect the appliance to an earthed 230 VAC electrical socket.
 Avoid overloading.
 Turn off the appliance after use by unplugging the equipment from the mains supply.
 Unplug the equipment from the mains supply before cleaning.
 The electrical installation must satisfy the applicable national and local regulations.
Technical details
Supply voltage [U]
Power [P]
Dimensions (B x D x H)
Installation
 Only connect the appliance to an earthed 230 VAC electrical socket.
After use
 Turn off the appliance after use by unplugging the equipment from the mains supply.
 Allow the plate to cool down.
 Clean the appliance (refer to maintenance).
Maintenance
 Before cleaning, always unplug the equipment from the mains supply.
 Never immerse the Hot tray in water or other cleansing agents.
 Clean the Hot tray with a damp cloth.
 Do not use aggressive or caustic cleansing agents.
 Wherever possible, avoid water coming into contact with electrical components.
Faults:
Always contact your supplier when a fault occurs.
Disposal
At the end of its life span, dispose of the appliance in accordance with the then applicable
rules and regulations.
230/240 VAC
190 W
325x530x40mm