Publicité
Les langues disponibles
Les langues disponibles
Electrical connection:
From page 6
Fit the relay with the connection
terminals pointing downwards in a
waterproof manner.
If required, fi t a switch (see Acces-
sories) into the dashboard, or fi t a
switch which is intended specifi cal-
ly for your car.
Lay and connect the cables in
accordance with one of the 4
circuit diagrams.
15
Dipped beam
Dipped beam
and position light
Position light
Main beam
and position light
By way of example for three coun-
tries, the following table is intended
to show with which lighting func-
tions fog lights may be combined.
It is however essential that coun-
try-specifi c laws are observed.
Check the lighting system.
Fasten the connection cables
securely.
Have the fog lights adjusted at a
specialist garage.
Only correctly adjusted lights
A
CH
D
provide optimum light.
Bulb replacement:
Page 10
Replace bulb in accordance with
the drawing. Do not touch bulbs
with bare fi ngers! Use a paper
towel or similar.
Another tip:
• Always keep the light lenses
clean. Dirt can absorb more
than 80% of the light output.
You can drive safely if you can
see well and therefore also be
C max.
seen well.
400 mm
Do you have spare bulbs and
fuses in your car?
C max.
400 mm
Publicité
