Intended Use; Overview Of The Components; Scope Of Delivery; Unpacking - Clatronic DBS 3634 Mode D'emploi

WARNING:
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• The tank should only be filled up to the maximum mark. Do not
overfill! Maximum water filling quantity: 2.3 litres.
• Do not bend the connecting hose (4)!

Intended Use

This appliance is intended for ironing of clothing and textiles.
It is intended for use in households.
Any other use shall be considered as not intended use and
can lead to material damage or even personal injury.

Overview of the Components

1 Handle
2 Steam jet button
3 Temperature control
4 Connecting tube
5 "Temperature" control lamp
6 Iron rest
7 Base
8 Cord clip
9 Releasing device for handle "UNLOCK"
10 Water tank with anti-scalingcartridge
11 Button below the water tank. Releasing device of the
water tank
12 Anti-scalingcartridge (inserted)
13 Fill opening
Buttons without illustration
Button MODE
Button ANTI CALC

Scope of Delivery

1x Steam Ironing Unit
2x Anti-scalingcartridge
42
DBS3634_IM

Notes on Use

Unpacking

• Remove any protective foils and stickers from the
soleplate.
• Please unwind the lead completely.

Electrical Connection

Make sure that the iron voltage (see name plate) and the line
voltage match.

Power Requirements

The station has a total maximum wattage of 2400 W. With this
connected load a separate supply line protected by a 16 A
household circuit breaker is recommended.
CAUTION: Overload!
• If you use extension leads, these should have a cable
cross-section of at least 1.5 mm².
• Do not use any multiple sockets, as this device is too
powerful.

Turn on and off

The marking for the temperature setting is located above the
thermostat.
Turn on: Ensure that the temperature control is in
the "MIN" position. Connect the mains
plug to a properly installed safety socket.
The appliance is immediately switched to
operating mode. The "amount of steam"
symbol flashes in an illuminated display for
about 90 seconds. Then the device is ready
for steam ironing.
08.06.16