Εν Heat Gun; General Power Tool Safety Warnings - F.F. Group HG 2000 EASY Notice Originale

8 | English
ENGLISH
APPLICATION
Your heat gun has been designed for stripping paint,
soldering pipes, shrinking PVC, welding and bending
plastic as well as general drying and thawing purposes.
WARNING! Read this manual and general safety in-
structions carefully before using the appliance, for
your own safety. Your power tool should only be
passed on together with these instructions.
DESCRIPTION
1. Nozzle
2. Ventilation slots
3. Temperature adjust knob
4. On/off switch (0/I/II)
PACKAGE CONTENT LIST
Remove all packing materials
f
Remove remaining packaging and transit sup-
f
ports(if existing)
Check the completeness of the packing content
f
Check the appliance, the power cord, the power
f
plug and all accessories for transportation dam-
ages.
Keep the packaging materials as far as possible
f
till the end of the warranty period. Dispose it into
your local waste disposal system afterwards.
WARNING
Packing materials are no toys! Children must not play
with plastic bags! Danger of suffocation!
1 heat gun
f
1 set of accessories (Accessories may not be nec-
f
essarily included)
1 instruction manual
f
ΝΌΤΕ
When parts are missing or damaged, please con-
tact your dealer.
GENERAL POWER TOOL SAFETY
WARNINGS
Read all safety warnings and all instructions. Fai-
lure to follow all warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future refe-
rence. The term "power tool" in the warnings re-
fers to your mains operated (corded) power tool
or battery operated (cordless) power tool.
WORK AREA
Keep work area clean and well lit. Cluttered and
f
dark areas invite accidents.
Do not operate power tools in explosive atmos-
f
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while opera-
f
ting a power tool. Distractions can cause you to
lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never
f
modify the plug in any way. Do not use any adap-
ter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will redu-
ce risk of electric shock.
Avoid body contract with earthed or grounded
f
surfaces such as pipes, radiators, ranges and re-
frigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditi-
f
ons. Water entering a power tool will increase the
risk of electric shock.
Do not abuse the cord. Never use the cord for
f
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or mo-
ving parts. Damaged or entangled cords increase
the risk of electric shock.
When operating a power tool outdoors, use an
f
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool on a damp location is
f
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use com-
f
mon sense when operating a power tool. Do not
use a power tool while you are tried or under the
influence of drugs, alcohol or medication. A mo-
ment of inattention while operating power tools
may result in serious personal injury.
Use safety equipment. Always wear eye protecti-
f
on. Safety equipment such as dust mask, non-skid
safety shoes, hand hat, or hearing protection used
whenever conditions require will reduce personal
injuries.
Avoid accidental starting. Ensure the switch is
f
in the off position before plugging in. Carrying
power tools with your finger on the switch or plug-
ging in power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before tur-
f
ning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing and balan-
f
ce at all times. This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose clothing or
f
jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
If devices are provided for the connection of dust
f
extraction and collection facilities, ensure these
are connected and properly used. Use of these de-
vices can reduce dust related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct
f
power tool for your application. The correct
power tool will do the job better and safer at the
rate of which it was designed.
Do not use the power tool if the switch does not
f
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
HG 2000 EASY