Psi16 Auxiliary Cash Register Control - Description - CAME PS Série Manuel D'installation

12
PSI16 Auxiliary cash register control – description
1
3
2*
1 - Power surge protection fuse
2 - Terminals for powering the 230V a.c. * control board
3 - Circuit protection fuse (Control Board)
4 - Terminals for connecting PSC3 units
The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must
not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply.
* Make sure you have a proper omnipolar cut off device, with more than 3mm distance between the power
PS BARCODE - Hardware and wiring
5 - "power on" warning LED light
6 - RS232 connector for connecting up RBMP1 card
7 - RS232 connector for connecting up MODEM
sectioned-contacts.
6
7
4
5