Troubleshooting - Whirlpool BF 30 NFI Série Mode D'emploi

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.
Malfunctions:
The TEMPERATURE indicator light
does not illuminates
The motor does not start.
The buzzer sounds at regular intervals.
The motor runs continuously.
The appliance makes a lot of noise.
Possible causes / Solutions:
• The plug has not been inserted into the electrical socket, or not far
enough to make contact, or there is no power in the house.
• The appliance comes with a motor protection control (see Start-up and
use).
• The appliance door has been left open for longer than 2 minutes.
The buzzer will stop sounding when you shut the door.
• The QUICK FREEZE button has been pressed: the QUICK FREEZE
indicator light is on (see Description).
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
• The appliance has not been installed on a level surface (see
Installation).
• The appliance has been installed between cabinets that vibrate and
make noise.
• The internal refrigerant makes a slight noise even when the compressor
is off. This is not a defect, it is normal.
GB
15