Safety Instructions - LaserLiner CAT III Mode D'emploi

Completely read through the operating instructions, the
"Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed on
together with the device.
Function / Application
Multimeter for taking measurements in the range of overvoltage
category CAT III up to max. 300 V. The multimeter can be used to
measure DC and AC voltages, direct current, battery charge status,
resistance and check diodes within the specified ranges.
Symbols
Hazardous electrical voltage warning:
Unprotected live components inside the device
housing may pose a risk of electric shock.
Danger area warning
Protection class II: The test device has
reinforced or double insulation.
Overvoltage category III: Equipment in fixed installations
and for applications where specific requirements with
regard to the reliability and availability of equipment
have to be met, e.g. circuit-breakers in fixed installations
and devices used in industrial applications which are
permanently connected to the fixed installation.

Safety instructions

• The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
• The measuring tools and accessories are not toys.
Keep out of reach of children.
• Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
• Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
• Exercise extreme caution when working with voltages higher than
24 V/AC rms or 60 V/DC. Touching the electrical conductors at
such voltages poses a risk of life-threatening electric shocks.
MultiMeter MultiMeter
EN
13