Operating Instructions; Automatic Defrosting Function; Collection Container For Water; Period Of Processing - Nemaxx BT55 Mode D'emploi

KEN001BT55

OPERATING INSTRUCTIONS

1. Plug in the device.
The device confirms this by a signal tone.
Now the display shows the environmental moisture level.
2. The level of humidification can be set from 10% (min.) up to 90% (max.).
During this process dehumidification mode-key flashes.
3. When you have reached the desired level wait for 5 seconds for the dehumidifier to
save the value.
The dehumidification mode-key stops flashing and the dehumidifier starts working.
The display for environmental moisture level shows the difference.
4. Before operating, place machine on a horizontal, stable surface.
5. The appliance shall be installed in accordance with national wiring regulations.
6. The appliance is connected by the cord of H05VV-F 3G 0.75mm

AUTOMATIC DEFROSTING FUNCTION

At low temperatures the device will start defrosting automatically.
During this phase the cooling fan works properly but the inserted compressor switches itself
off.
The "Automatic Defrosting"-symbol and the "FAN"-key flash.

COLLECTION CONTAINER FOR WATER

If the collection container is completely filled, the symbol "Filling Level Indicator" will show
this.
In addition, there will be an acoustic signal (for 5 seconds) and the device will stop
dehumidifying.

PERIOD OF PROCESSING

The Operating Hours Counter shows for how many hours the device has been in use.
EN
6
Version: 3.0
19.07.2017
with plug.
2