Dexter 20VJS2-28.1 Mode D'emploi page 323

2. SAFETY INSTRUCTIONS
SERVICE
A. Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
B. Never service damaged battery packs. Service of battery packs should
only be performed by the manufacturer or authorized service providers.
SAFETY INSTRUCTIONS FOR ALL FOR JIGSAWS
A. Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
B. Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the workpiece by hand or
against your body leaves it unstable and may lead to loss of control.
C. Turn the product off immediately, if the cutting blade gets
jammed.
D. Ensure that the workpiece is free of foreign objects such as screws
or nails.
E. The power tool shall not be wet or applied in wet environment.
Keep the handles dry to ensure safe control.
F. Grip the product securely with two hands so you have full control
at all times.
G. Ensure that the air vents are always unobstructed and clear.
Clean them if necessary with a soft brush. Blocked air vents may lead to
overheating and damage the product.
H. Switch the product off immediately if you are disturbed while
working by other people entering the working area. Always let the
product come to complete stop before putting it down.
I. Do not overwork yourself. Take regular breaks to ensure you can
concentrate on the work and have full control over the product.
FR FR
ES ES
PT PT
IT IT
EL EL
PL PL
RU RU
UA KZ
KZ UA
RO RO
BR BR
EN
EN
323