Water Inlet Electrovalve; Operation Of Token Box / Home Automation Connection - Teuco 630 Manuel De L'utilisateur

EN

WATER INLET ELECTROVALVE

The system is set to automatically reinstate the water level in the compensation tank.
During this phase, the display shows:
The system is set to add water for max. an hour a day.
A control function checks the level is reached every time the electrovalve opening is operated.
If the water level is not reached for seven consecutive times (7 days), the system stops (significant water
leakages, lack of water supply, faulty electrovalve, level sensor failures, etc.).
The display shows:
Carry out the necessary checking or contact the technical service.
To remove the block, press the ► key.

OPERATION OF TOKEN BOx / HOME AUTOMATION CONNECTION

The system features a contact pair pre-set for the connection of a token box or a home automation control.
After receiving the signal (the contact is closed for few seconds), the system switches off the spa pumps in
sequence.
The pumps works for the time pre-set on the control panel.
42
12:34 01/03/2015
H 0 ON
2
12:34 01/03/2015
INLET EV BLOCK
H2O STOP
630