Teuco 630 Manuel De L'utilisateur page 33

4. Filling the minipool
Fill the pool until the water is up to
the rim.
5. Filling the sand filter
a
Remove the cap of the sand filter by
undoing the nuts and washers.
b
Place a bag over the pipe inside the
filter, for protection.
c
Pour 45 litres of water into the
container and, slowly, add 6 bags of
sand (supplied with the pool), making
certain not to damage the inside of
the filter.
Caution: do not inhale the dust.
Having completed the above steps,
remove the protective bag and clean
the rim of the filter.
Refit the cap of the filter, greasing the
seal with vaseline.
Tighten the nuts and
uniformly,
WITHOUT FORCINg.
6. Continue filling the pool, allowing
the water to spill over the edge
and away to the overflow tank.
Stop filling the pool when the
water reaches the level of the
first metal reinforcing hoop.
7. Open all valves
pipelines, except for the system
drain valve, and check that there
are no leaks from pipes or fittings.
630
a
b
c
washers
along the
a
b
c
45 lt.
EN
x6
33