Care And Maintenance; Cleaning The Appliance; Replacing The Interior Light; Power Failure - Summit Professional SWC3000 Mode D'emploi

Cleaning the Appliance

•
Turn off the power, unplug the appliance, and remove all items including
shelves and racks.
•
Wash the inside surfaces with a solution of warm water and baking soda
(2 tablespoons of baking soda in a quart of water).
•
Wash the shelves with a mild detergent solution.
•
Wring excess water out of the sponge or cloth when cleaning the areas
of the controls, or any electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.

Replacing the Interior Light

Note: Replacing of the LED light must be performed by a qualified technician.
1. Unscrew the 2 screws on the light cover.
2. Remove the screw on the LED panel.
3. Replace the LED light with another of the same specifications.

Power Failure

Most power failures are corrected within a few hours and will not affect the
temperature of your appliance if you minimize the number of times the doors
are opened. If the power is going to be off for a longer period of time, you need
to take the proper steps to protect the contents.

Vacation Time

•
Short vacations: Leave the appliance operating if you will be away for
three weeks or less.
•
Long vacations: If the appliance will not be used for several months,
remove all items and turn off the appliance. Clean and dry the interior
thoroughly in order to minimize odors and mold. Leave the doors open
slightly, blocking them open if necessary.

Care and Maintenance

11