Pattfield Ergo Tools PE-20V JSB Traduction De La Notice Originale page 70

INCLINATION ADJUSTMENT
1 Loosen the cylinder head bolt with the
allen key 8 at the bottom of the foot-
plate 7 counterclockwise.
Caution! Make sure the tool is
switched off and the battery re-
moved.
3 Fix the bolt at the bottom of the foot-
plate 7 clockwise.
ATTACH BATTERY
1 Slide a charged battery 11 (not includ-
ed) into the battery slot until it clicks
into place.
SAW BLADE REPLACEMENT
1 Always use a blade that suits your
workpiece.
The blade clamp can only hold blades
with T-type shank securely (see picture
on foldout page to the right.) Do not use
other blade types.
3 Rotate the blade clamp 4 counterclock-
wise. Insert the new blade 6
teeth facing forward and release the
blade clamp.
138 EN
2 Set the desired inclination. Markings on
the foot plate 7 give a rough impression
of the deviation from a vertical cut.
REMOVE BATTERY
To remove the battery 11, press the
12
battery release switch
the battery.
2 Rotate the blade clamp
clockwise.
Carefully pull out the saw blade
the blade clamp 4.
Caution! The saw blade is sharp.
Make sure the tool is switched off and
the battery removed. Wear protective gloves.
4 Make sure, that the blade
with the in the groove of the guide roller 5, and
that the saw blade is securely fixed.
1
3
1
and pull out
4 counter- 1
6 from
6 is centered 3
1.
2
2
2
4
2.
1.
2.