Barloworld Scientific Stuart SS10 Manuel D'utilisation page 2

English
IEC connector
Figure 1
Thank you for purchasing this Barloworld
Scientific product. To get the best
performance from the equipment, and for
your personal safety, please read these
instructions carefully before use.
Overload
indicator light
Top grommet
➞
This equipment is designed to operate under the
following conditions:-
❖ For indoor use only
❖ Use in a well ventilated area
❖ Ambient temperature range +5°C to +40°C
❖ Altitude to 2000m
❖ Relative humidity not exceeding 80%
❖ Mains supply fluctuation not exceeding 10%
❖ Overvoltage category II IEC60364-4-443
❖ Pollution degree 2 IEC664
Speed
control
On
indicator
light
Mains
on/off
switch
Supply
indicator
light
Keyless
chuck