Ego Power+ LM2020SP Guide D'utilisation page 24

newly cut area will not be exposed to direct sunlight.
◾
For the best mulching performance, set the cutting height to remove approximately one third of the grass blade
length, ideally no more than 1-1/2'' at one time. If the grass is overgrown, it may be necessary to increase the cut
height to make it easier to mow and to prevent overloading the motor. Slow your cutting pace in tall or thick grass
conditions. For mulching extremely thick or tall grass, it is advisable to first cut at a high cut-height setting, and
then re-cut to the final cut height. Otherwise, make narrower cuts and mow slowly. ALWAYS MAKE SURE THAT THE
BLADE IS SHARP.
24
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2020SP/LM2020