Syncing Two Bases - beautyrest Black Luxury Base Consignes D'utilisation

syncing two bases (optional)
A Sync Cord is included with the base. Not available on Queen, Full or Full-Long size bases.
The Sync Cord connects two control boxes to a single remote for the synchronization of two bases.
This process is most commonly used for syncing two connected TXL bases.
STEP 1
Unplug bases from power source.
STEP 2
Connect the male ends of the sync cord to the Multifuction port of
each control box.
STEP 3
Plug bases back into the power source.
STEP 6
Check to ensure all cords are securely attached. Both remotes
will now operate both bases simultaneously.
14
The system is now linked. Buttons pressed on either remote
will control both bases simultaneously.
Control Box 1
HEAD
4
MASSAGE
3 FOOT
MASSAGE
6
LUMBAR
5
TILT
2
FOOT
1
HEAD
Sync Cord
PERFORMANCE NOTES
If bases become mismatched, pressing the FLAT button will
re-sync the mechanical positions.
Control Box 2
HEAD
4
MASSAGE
3 FOOT
MASSAGE
6
LUMBAR
5
TILT
2
FOOT
1
HEAD