Remote Control Pairing - beautyrest Black Luxury Base Consignes D'utilisation

remote control pairing

Remote Pairing
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event
that the remote is not paired with the base, follow the steps below.
STEP 1
Unplug the Power Cord from your power outlet. Wait 1
minute, then plug it back in to your power outlet. Perform
Step 2 within 10 seconds, while the control box light is
flashing.
Power Supply
STEP 2
Press and hold the PAIR button on the back of the remote.
The PAIR button will illuminate and start to flash. When the
PAIR button stops flashing, the LED light on the control box
will stop flashing. Release the PAIR button.
PAIR button
Power Cord
STEP 3
The remote is now paired to the adjustable base. Test all
remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process
again.
13