Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Press the input selection button (
tablet. The Areal Bar appears in your list of found devices ("Areal Bar 550"). The Areal Bar automatically
searches for previously paired BT devices whenever you switch to BT mode. If a previously paired device is
found, the Areal Bar automatically pairs.
If you are prompted to enter a password, enter "0000".
Press and hold
for 5 seconds, to un-pair the currently connected BT device.
In BT mode, use the buttons
No Power
No Sound
No response from the unit
Remote control does not work
Unit powers off after 20 minutes
22
BT
) reepatedly to activate BT mode. Activate BT on your smartphone/
and
/
to operate the music playback.
Trouble Shooting
•
Ensure the mains plug is connected to a power supply, and
is switched ON.
•
Make sure there is power to the mains socket.
•
When playing from the AUX input, Make sure the external
source has the volume turned up and is playing a track.
•
Make sure the volume is turned up.
•
If using the digital coaxial or optical cable connection en-
sure the source DIGITAL output is set to PCM, LPCM, PCM
2Ch stereo or PCM downmix.
•
BT device not paired. Refer to "BT operation".
•
Unplug the power cable for 1 minute then plug back in
again.
•
Reduce the distance between the remote and main unit.
•
Check the batteries are installed correctly.
•
Replace the batteries.
•
Aim the remote directly at the Sound bar
•
This unit is designed to enter STANDBY mode automati-
cally after 20 MINUTES of inactivity. Press the STANDBY
button to wake the unit.
Publicité
Table des Matières
