Wall Mounting - auna multimedia Areal Bar 550 Mode D'emploi

Wall Mounting

In order to avoid damage to the equipment and personal injury you should get a qualified person to drill the
fixing surface and fit the appropriate wall fixings. Take care not to allow the main unit to fall while attempt-
ing to hook onto the wall mount brackets.
Before mounting, check the wall strength; consult qualified personnel if
necessary. When drilling into walls, always check that there are no hid-
den wires or pipes etc. Make sure the screws and wall plugs are suitable
for supporting the unit.
Step 1: Align the Sound bar in the chosen location. Use a pencil to mark
the 2 drilling positions with a distance of 287mm (11.3") apart:
Note: The Sound bar should be located at least 7.5cm (3") below the bot-
tom of the TV:
Step 2: Drill holes as marked in step 1:
Step 3: Insert 2 screws (not supplied) into the holes and tighten. Take
care to leave 5mm between the screw heads and the wall.
NOTE: You will need to ensure the screws are long enough to sufficiently
grip the wall while allowing 5mm between screw head and wall.
Step 4: Hook the Sound bar into the screws. For secure mounting, ensure
the screw heads slide firmly into the narrow part of the brackets:
20