auna multimedia Areal Bar 550 Mode D'emploi page 21

Connecting mains power: Connect the AC power adaptor of the sound bar between the DC IN socket and
the power supply outlet. Switch the power outlet ON
Power on/Standby: Press STANDBY to switch on/switch to standby. Please note: As part of the power
saving mode the unit will enter STANDBY mode automatically after 20 minutes (approx.) of no audio output.
The Areal Bar functions can be accessed through the touch panel or via the remote control.
Source selection: Press
When switching inputs there will be a 5 second pause after selecting BT while the unit scans for paired
devices.
The Status-LED indicates the active input mode or the recent operation:
Operation / function / mode
Standby
Source
VOL+/- BASS+/- EQ MODE
MUTE
Volume and sound: Adjust the output volume, pressing VOL+/-. Use the BASS+/- buttons to adjust the bass
enhancement. Press EQ to toggle the standard mode/movie mode. Press MUTE to toggle mute/unmute.
Audio messages: Switch to STANDBY, then press and hold
audio messages.
Operation
repeatedly to select the audio input (AUX, BT, COAX, OPTICAL). Please note:
AUX
BT: Pairing mode
BT: paired
COAX
OPTICAL
Status LED
solid red
solid green
flashes blue
solid blue
solid white solid white
solid purple
flashes once
flashes red
for 5 seconds to activate/de-activate the
21