Over-Temperature Protection; Residual Heat Warning; Auto Shutdown; Using The Timer - Mx Onda MX-VC2640 Manuel D'utilisation Et D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 71
To unlock the controls
1. Make sure the ceramic hob is turned on.
2. Touch and hold the keylock control
3. You can now start using your ceramic hob.
When the hob is in the lock mode, all the controls are disable except the
ON/OFF
control in an emergency, but you shall unlock the hob first in the next
operation

Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic
hob. When an excessive temperature is monitored, the ceramic hob will stop
operation automatically.

Residual Heat Warning

When the hob has been operating for some time, there will be some residual
heat. The letter " H "appears to warn you to keep away from it.

Auto Shutdown

Another safety feature of the hob is auto shut down. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times are shown in
the table below:
Power level
Default working timer (hour)

Using the Timer

You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off or more than one after the set time is
up.
• You can set the timer for up to 99 minutes.
,
you can always turn the ceramic hob off with the ON/OFF
1
8
for a while.
2
3
4
8
8
4
12
5
6
7
4
4
2
8
9
2
2

Publicité

Table des Matières
loading

Table des Matières