Zafferano Poldina Pro XXL LD0360B3 Mode D'emploi page 5

ASSEMBLY AND INSTRUCTIONS FOR USE
INCLUDED
SWITCHING ON
<1 sec
Quickly press the touch sensor to
switch on the lamp
Charge the battery before initial use.
To correctly charge the lamp, we recommend
that you:
1) Connect the USB cable to the adaptor;
2) Put the plug into the electrical socket
3) Place the lamp on the charging base;
4) When fully charged, disconnect the plug
from the electrical socket
Quickly press the touch sensor
to switch off the lamp
CHANGING THE COLOUR TEMPERATURE
on / off
x 5
Turn the lamp on and off 5 times in succession; the 5th time you turn it on
(10th touch), the colour temperature will be changed.
N.B. No more than 5 seconds must elapse between one touch and the next.
CHARGE
1-2
For more information and updates visit our website
NOT PRODUCED IN ITALY - IMPORTED BY
Zafferano srl, Viale dell'Industria, 26 - 31055 Quinto di Treviso - TV - Italy
www.zafferanoitalia.com
1
SWITCHING OFF
<1 sec
(2700 - 3000 K)
3
DIMMER FUNCTION
When the lamp is switched on, lightly
press the touch sensor to obtain the
desired brightness. Every time you turn it
on, the light intensity returns to 100%
INDICATOR LEDS
RED LED
charging in progress
GREEN LED
the battery is charged, it is
advisable to disconnect it
from the power charger
2
4